Custom Firmware 6.37 ME-3 Released! Added ISO Driver

Neur0n has just made his 6.37 CFW one more step closer to greatness by adding ISO drives. It has two functions, UMD required mode and the ME driver which is with no UMD. This is the best of the new Custom Firmware releases we have seen as you also have a recovery menu, vsh and PS1 support (Titles downloaded via PSN)

Instructions are below.

First, you need to install CFW or HEN(ex. 5.00M33 , 6.20TN , 6.35PRO) in your PSP.

1. copy UPDATE folder at ms0:/PSP/GAME/.
2. Put 6.37 official update at ms0:/PSP/GAME/UPDATE/637.PBP .
3. Run installer from xmb.

– features –
Hold R trigger and turn on the psp, you can enter recovery menu.
Hold Home button and turn on the psp, you can Boot OFW !!!!!!!

Add OPNSSMP option. Now you can run ISO without decrypt EBOOT.bin ,if ISO’s required FW is lower than 6.37.
You can set this option at “RecoveryMenu -> Advanced -> Advanced Config -> Excute OPNSSMP.bin” .

Prometheus ISO Loader(PIL) seemed not support 6.37 . If you use PIL, need decrypt EBOOT.BIN .

Custom Firmware 6.37 ME-3 Changelog:

v3
– Add iso driver.(“Normal -UMD required-” and “ME driver -NO UMD-”)

ALERT: This is for PSP-2000′s only that can take Pandora batteries!!

Source: Neur0n’s twitter

DOWNLOAD

http://ul.to/rkdzj6

Custom Firmware 6.37 ME-2 Released! Dual boot OFW/CFW

Neur0n is becoming quite the Dark_AleX it seems, he’s released something new. You thought you saw it all in a CFW right? Well think again. 6.37 ME brings a cool new dual boot feature. Just hold home on a cold boot and you’ll boot up OFW 6.37!!! How cool is that?

Oh and before you tell me I’m slow, I know this was out a day ago. However it wasn’t exactly stable enough for me to post it. But Neur0n has been busy. In fact in the last hour of me posting this a more stable update has been released, that has many bug fixes. This firmware is for PSP-2000 units only that can be fully flashed. So don’t try this on a TA88v3+ and make sure your PSP has a Pandora Battery handy too in case something goes wrong and you do get a brick. Its not considered a 100% stable CFW, you have been warned….

Custom Firmware 6.37 ME-2 changelog:

v2
– Update NidResolver.
– Bug fix.

Dev’s notes:

CFW 6.37 Minimum Edition v2 for PSP2000 by neur0n

– What is this?–
This is CFW work on PSP2000.

The degree of stability is still unknown.
Please test it on your own and refer to different people’s test reports.

–How to Install–
First, you need to install CFW or HEN(ex. 5.00M33 , 6.20TN , 6.35PRO) in your PSP.

1. copy UPDATE folder at ms0:/PSP/GAME/.
2. Put 6.37 official update at ms0:/PSP/GAME/UPDATE/637.PBP .
3. Run installer from xmb.

– features –
Hold R trigger and turn on the psp, you can enter recovery menu.
Hold Home button and turn on the psp, you can Boot OFW !!!!!!!

Add OPNSSMP option. Now you can run ISO without decrypt EBOOT.bin ,if ISO’s required FW is lower than 6.37.
You can set this option at “RecoveryMenu -> Advanced -> Advanced Config -> Excute OPNSSMP.bin” .

Prometheus ISO Loader(PIL) seemed not support 6.37 . If you use PIL, need decrypt EBOOT.BIN .

Required: Original Firmware 6.37

Download

http://ul.to/j9z24h

6.35 Custom Firmware V12. Runs ISO’s without decrypt eboot *Updated*

This Custom Firmware 6.35 is only for PSP-2000 model’s that can use pandora batteries. If you use this on a ta88+, PSP-3000 or PSP GO you will brick your system!

Update#5: Version 12 released, Adds UMD Video support. Mount in the VHS Menu.

Update#4: Checking Neur0n’s twitter page I see yet another update, this guy doesn’t stop improving it. It will now run ISO’s without the decrypt EBOOT if they require OFW less than version 6.35. Here is the changelog since we last looked at his 6.35 Custom Firmware. The download is at the bottom of this page. Read the readme inside the zip for installation instructions.

6.35 Custom Firmware v11 changelog:

v11
– Update OPNSSMP option. Now you can run ISO without decrypt EBOOT.bin ,if ISO’s required FW is lower than 6.35.
– Change config file name from config.se to config.me .
v10
– Fix USB toggle bug in RecoveryMenu.
– Add patch to antiCFW function.
– Add OPNSSMP option.
– Update NidResolver.

Update#3: Version 9 is out, now adds the NP9660 ISO Driver.

Update#2: Version 8 is now out. Download below:

v8
– Fix DigitalComic crach.
– Fix cursor when use skiplogo option.
– Fix ciso icon loader.
– Unlock avc video(480×272).
– Update system patch to allow syscall from kernel_mode.

Update: Neur0n has released version 7 with has Fixed the NidResolver’s bug.

Neur0n has updated his PSP-2000 Custom Firmware 6.35 to v6, this new update adds a VSH Menu and Recovery menu. If you hold R shoulder button on boot, it will launch the recovery menu. Just like the M33 and GEN Custom Firmwares.

Remember this is only for PSP-2000′s that can use Pandora batteries if bricked. Use this Custom Firmware at your own risk!

CFW 6.35 beta v6 for PSP2000 by neur0n

–What is this?–
This is CFW work on PSP2000.

this CFW is beta version.
you shouldn’t use this tool ,if you don�ft have a pandora battery handy.
This will only work on hackable psp 2000 models. other model is not supported.

–How to Install–
1. install OFW6.35 in your PSP.
2. Install 6.35PRO in your PSP.
3. Run this tool on 6.35PRO

You can install this from 6.35Custom v2 ,v3, v4 and v5 too.

Hold R trigger and turn on the psp, you can enter recovery menu.
Hold Home button and turn on the psp, you can Boot OFW !!!!!!!

– For Developers –
vshmenu_src is vshmenu’s source.
If you have a Programming skill,you can create original vshmenu!

If you create satelite.prx , put it in ms0:/seplugins/satelite.prx .
It would be loaded priority than flash0.

–History–
v6
– Update Nid Resolver.
– Update Recovery Menu.
– Added vshmenu.
v5 -fix
– fix bug when run official UMD/PSN Games.
v5
– Update Nid Resolver. Now you can use PSPLink!
– Update Recovery Menu
v4
– Update Nid resolver. Now you can use Prometheus ISO loader!
v3 -fix
– fix config save functin
v3
– Add recovery menu and bit of config.
– Update Nid resolver. Now you can use CXMB plugin !

Source: neur0n / Twiiter

Download:

http://ul.to/yj7j7t

aLoader Beta 2. ISO loader plug-in for 6.20 TN HEN

PSP dev ardi has released a second beta of his ISO loader plug-in for 6.20 TN HEN called aLoader. It allows users to boot ISO’s straight from the XMB. Only ISO’s are supported at the stage. Installation is easy, download the archive below. Move the folders and content from the aloader.prx folder to the root of your PSP’s memory stick or mass memory.

aLoader Beta 2 Changelog:

now ICON0, icon1, Pic0, etc.
ISO file name exceeding 31 characters is no longer a problem
. ISO or. Iso fixed (case == does not matter)

Source: PSPKing.de

Download:

http://ul.to/thvbj1

Custom Firmware 6.35 PRO-A Released. For all PSP Models!

Another new Custom Firmware added into the mix, this time its 6.35 PRO-A from Virtuous Flame. This is working on all PSP models. I can confirm it works on my Go and other users have reported this working on the PSP-3000 4G. Its different from 6.20 TN and 6.35 v9 CFW as this one displays ISO’s and CSO’s in the XMB which can be directly launched from there too. Custom Firmware 6.35 PRO-B is also in the works and will have PSX (pops) support and a recovery menu. Below is the translated readme.txt with installation and 6.35PRO info.

This is the one from China (L) CFW. 635PRO as an enhanced version of it has XMB ISO display.

Features:
Support all types of PSP, which PSP-1000, PSP-2000, PSP-GO is strictly tested
Support the unlock 52MB of memory, has reached the level of the times 5xx
The NP9660 has a built-in and March33 ISO driver to support more games
XMB ISO has indicated support for ISO & CSO
Has nodrm engine, support for direct reading of the DLC and the decrypted EDATA / PGD file
With VSH MENU, you can view or change system settings, etc.
Redesigned NID Resolver, support more home-made software, including CMFr21c
Has a variety of patches, such as brightness and video resolution four other patches
Support version.txt, put it in ms0: / seplugins / version.txt to take effect

Installation:
FW <635 fw =" 636" class="st_tag internal_tag">635PRO (HEN) into the “635PRO-A Updater”, press the X button to start the installation
After successful installation, you can run “635PRO-A Fast recovery”, directly to revert 635PRO-A.

Note:
635PRO-A downgrade 6.20 is not supported, if necessary, downgrade using the 635 Davee device.

Future Prospects (635PRO-B):
PS1 games will support the self-made
Will support the Recovery Menu

Thanks:
neur0n and booster of the satelite code
Davee’s 635 device in the downgrade exploit code, the use of $ v1 are power_buf_address
Total_noob the skip gameboot patch
Dark_Alex of the galaxy and march33 ISO drive, and usbdevice.prx
kirk-engine all the members of the project, so that we no longer need the game Vulnerability

Source: A9VG

Thanks dimitar

I RECOMMEND TO STAY AT 6.20 TN-C

DOWNLOAD

http://ul.to/edimu5

Downgrader for FW 6.31/6.35 to Firmware 6.20 Released!

Davee's 6.31 & 6.35 to 6.20 Fw downgrader.

Davee has released a signed 6.31 & 6.35 to Firmware 6.20 downgrader for those that want to switch from 6.31 HEN or 6.35 HEN to use Total_Noob’s 6.20 TN HEN. Downgrading is risky business, so remember if you do decide to take this path and downgrade. We’re not responsible if you brick your PSP!

One thing to remember 6.20 TN-D is on the way, this will have POP’s support (PSX) 6.3x HEN developers may or may not be adding PSX support in later releases…

6.35/6.31 -> 6.20 Downgrader By Davee

[What does it do?]
Allows users who are incontent with their firmware to downgrade to 6.20 using the Sony Updater.

[How do I use it?]
Copy the “PSP” folder to your PSP. The downgrader is “signed” and can be launched from OFW XMB. You need to copy the 6.20 update to PSP/GAME/UPDATE/EBOOT.PBP and for PSPgo it must be the eflash it is placed on. After setup run the downgrader and follow the onscreen instructions.

[What does it technically do?]
It uses the utility/power exploit to gain kernel access and reboots into the updater with a special PRX running. This PRX uses the pspdecrypt functionality to decrypt the updater PRX when needed. This allows the updater to boot in the newer firmwares.

Source: lolhax

Download: Downgrader for FW 6.31/6.35 to Firmware 6.20 R1 - 5.4 MiB

http://ul.to/0u5tzz

6.20 TN-C HEN Released. Now signed, runs from XMB!6.20 TN-C HEN Released. Now signed, runs from XMB!

PSP developer Total_Noob has made good on his promise to update his famed 6.20 TN HEN with the release of 6.20 TN-C. This update includes many updates and features, including online gaming support. In addition to these updates the HEN has now been signed (which we have been seeing a lot of lately) so it no longer needs to be run through the Half-Byte Loader and Patapon 2 demo exploit.

Here is the full changelog:

(Changelog 6.20 TN-C)
———————
- Added 50 MB large memory support for every PSP models except PSP classic.
- Added online gaming support.
- Added server for TN NETWORK UPDATE.
- Fixed bug in VSHMenu where CPU speed hasn’t changed when set it to default.
- Fixed bug in Digital Comics that caused a crash.
- Fixed server redirection.
- Removed FAKE INDEX.DAT from VSHMenu, but feature is still effective (move version.txt to X:/seplugins/).
- Signed HEN with prxEncrypter (thanks to Mathieulh, bbtgp, coyotebean, kgsws and everyone who involved to this project).
- Used Davee’s $v1 trick to find power_buf_addr.

In addition to the TN-C update, Total_Noob also announced a few features he plans on adding to the next update 6.20 TN-D, including POPS support (aka the PS1 playback everyone has been wanting) and improved NAND protection.

So until then, many many thanks to Total_Noob for his continued work, and we are looking forward to the next release!

Tested on our PSP Go, works fine!

Instructions are simple: simply download and extract the HEN, then copy the PSP folder from the download into the root of your memory stick or internal memory, then run 6.20 TN-C from your XMB. Simple as that!

Download:

http://ul.to/5d7df1

[Theme] Ghost 6.20 TN

ince my friend ZapR is nowhere to be seen, I thought i'd update this theme I've been fixing.

Presenting Ghost, a beautiful 6.20 theme!

Preview:
-----------------------------------------------------
Ghost 620 Download

Spoiler

Changelog:

- Fixed battery bar position
- Removed original conflicting shadows for icons
- Extras icon added
- SensMe Icon added
- Theme Apply/Delete menu semi-fixed
- Volume bar repositioned and fixed
- Busy icon now repositioned to wave page
- PS Information board icon resized (Must still remove glow)
- Removed most 'TM's (still a few)
- Fixed text (eg. Free: 13GB NOT Free space 13GB)


Credits:

ZapR - Convertion
Carlover1998 - All fixes and extras icons
dliug - original theme creator for 5.00 m33

Hope you guys like it!

6.20 TN-C

6.20 TN-C Has Been Released Over At Pspgen

Changelog

The PSP 2000, 3000 and GO have more RAM than the PSP 1000 (50MB). But it was "blocked". It is now available.
Opportunity to enjoy the online games on a game mode offering infrastructure.
Opportunity to update the HEN from the menu Network Update.
Fixed a bug with Digital Comics .
Fixed a bug with the VSH menu . Now when CPU Speed is set to default , the change will be effective.
The option Fake INDEX.DAT has been removed from TN VSH menu but remains active. Remember that just put the file version.txt in the folder seplugins to the console information to be distorted.
The pitcher is signed, it is possible to run the HEN directly from the XMB without using the Half Byte Loader.
Using the Registry v1 of Davee to find the power_buf_addr.
Fixed the redirection server.

Coming Soon

Support pops (PSOne emulation)
Improved protection of NAND.

No Icon0 Or Pic1: http://ul.to/tcnhfz
Custom Icon0 And Pic1: http://ul.to/1tu421
Custom Eboot #2:http://www.mediafire.com/?20qeny6fh02rgo7
Red Icon0 And No Pic1:http://www.megaupload.com/?d=01ZM5CK7 (Thanks To CoreRaiserNL)
Mediafire Mirror:http://www.mediafire.com/?5559yh2u9cdn8kz
Mediafire Mirror to The Original And Custom Eboots:http://www.mediafire.com/?5gdb5ffys31p8

Credit to VelvetNoise For The Original Custom Icon0 And Pic1
I Only Edited The -A Out Of the PIC1

PIC1.png (40.52 KiB) Viewed 6995 times

ICON0.png (3.4 KiB) Viewed 6994 times

The Red Icon0 Is this except red

SCREEN.png (57.38 KiB) Viewed 5645 times

Custom Eboot #2